Tag: standards

Can your Cable Lugs pass these 3 tests to get cULus and CSA Approval?

How to get cULus and CSA Approval for Cable Lugs?

What decides if your cable lug is safe or if it fails in the field? The answer is simple. cULus and CSA approval. But before we talk about approvals, let us understand the basics. What are Cable Lugs? A cable lug is a connector that joins an electrical conductor to ...

Read More

Is your Suspension Clamp strong enough for ABC? Find out with these tests.

Learn how to perform three important tests on suspension clamps: A) High Voltage Test B) Slipage Test C) Tensile Test Why are tests important? Suspension clamps support and hold the messenger cable in an Aerial Bundled Cable system. They carry electrical and mechanical loads under harsh outdoor conditions. These tests ...

Read More
Learn How to Choose the Right Earth Rod Size for Your Project

Earth Rod: Diameter & Length Misconceptions

 In today’s video, we will discuss how to select your Earth Rod’s dimensions and some common misconceptions related to it. Wrong selection of these dimensions puts your electrical safety at risk. What is an Earth Rod? An earth rod is a type of earth electrode, and is an essential part ...

Read More
Your Ultimate Checklist for Installing Termination Kits and Joints

Your Ultimate Checklist for Installing Termination Kits and Joints

In this blog, we will go through a common installation checklist for two key components in any medium voltage cable system – Heat Shrinkable Straight Through Joint and Termination Kits. What are Straight Through Joints & Termination Kits? A Straight Through Joint connects two ends of a cable, restoring electrical ...

Read More
Solar Safety Standards

Solar Safety Standards for Your Solar Projects

Nowadays, the world is spending billions of dollars on building new solar plants. Some of them have very smart strategies to produce profitable electricity and to ensure that their plants are safe for the next 25 to 30 years. But what is their secret? Very simple: adhering to international quality ...

Read More
Testing If An AB Cable Eye Hook Survives Tensile & Galvanizing Tests

Eye hook – Tensile & Galvanizing Test

Eye hooks are critical fittings used with dead-end and suspension clamps to support Aerial Bundled Cable lines. They carry both mechanical load and environmental stress, so every piece must be tested before installation. Eye hooks hold the entire weight and tension of the cable during and after installation. If one ...

Read More
Buying & Installing a Suspension Clamp? Follow This Checklist!

Suspension Clamp Installation Checklist

Suspension clamps are used to suspend and grip neutral messenger cables in Low Voltage Aerial Bundled Cable System. They hold cables in place without damaging the insulation. A suspension clamp attaches to a bracket to support the cable’s weight and keep it secure along the route. Since suspension clamps carry ...

Read More

20 Earthing & Lightning Protection Standards to Protect Your System

 In today’s blog, we will cover 20 standards that help you understand Earthing and Lightning Protection better. Everyone talks about electrical failures after they happen. But no one asks, “Was your system installed as per the standard?” These standards tell us where to crimp, how to install, what size to ...

Read More
Documents selected
Loading...