The kits manufactured at Axis offer reliability and flexibility to meet the demands of cable network operators, suitable for LV & MV Cables. The components are designed to handle extreme weather, outdoor sunlight, and heavily polluted areas, addressing typical partial and surface corona discharge under challenging service conditions. All components are supplied in an expanded state and shrink effectively upon heat application.
Nominal voltage U0/U(Um) | Cross section (mm2) | Dimensions(mm) | No. of rain sheds | |
---|---|---|---|---|
L | D | |||
3.6 / 6(7.2)kV | 50-120 | 800 | – | 0 |
150-240 | ||||
300-400 | ||||
500 | ||||
6 / 10(12)kV | 50 -95 | 800 | – | 0 |
6.35 / 11(12)kV | 120-185 | 800 | – | 0 |
240-300 | ||||
400-500 | ||||
603 | ||||
8.7 / 15(17.5)kV | 25-50 | 800 | – | 0 |
70-120 | ||||
150-240 | ||||
300-400 | ||||
500-630 | ||||
12 / 20(24)kV | 35-50 | 800 | 105 | 2 |
12.7 / 22(24)kV | 70-120 | 800 | 105 | 2 |
150-240 | ||||
12.7 / 22(24)kV | 300-400 | 800 | 140 | 2 |
500-630 | ||||
800-1000 | ||||
1200 | ||||
18 / 30(36)kV | 35-50 | 800 | 105 | 4 |
19 / 33(36)kV | 70-120 | 800 | 105 | 4 |
19 / 33(36)kV | 70-120 | 800 | 140 | 4 |
150-240 | ||||
300-400 | ||||
500-630 | ||||
800-1000 | ||||
1200 | ||||
20.8 / 36(42)kV | 50 | 800 | 140 | 4 |
26 / 35(42)kV | 70-120 | 800 | 140 | 4 |
150-240 | ||||
300-400 | ||||
500-630 | ||||
800-1000 | ||||
1200 |
Yellow stress relief mastic is laid around the end of the screen cut. Stress control tube, together with stress relief mastic, is used to smooth out the electrical field at the cable end.
Anti-tracking insulation tubes and rain sheds demonstrate excellent tracking and erosion resistance. This protect Woer terminations from tracking even in severe service conditions.
Anti-tracking rain sheds lengthen surface creepage distance.
Durable sealing is achieved by hot-melted adhesive inside the sealing tube and anti-tracking insulation tube. For 3-core cables, the crutch area is sealed and protected with an adhesive-coated breakout which is installed over the cores and the end of oversheath.
Either soldering or solderless earth connection is available to connect metal screen or armour to ground. For cables with wire screen, copper wires are imbedded in the sealing mastic to prevent any corrosion and moisture sealing.
AXIS House, Plot# 149-BCD,
Kandivali Co-Op Industrial Est. Ltd., Kandivali (W), Mumbai – 400067,
India.
© Copyright Reserved by Axis Electrical Components (India) Pvt. Ltd.
Get Your Free Book Now!