Heat Shrinkable Termination Kits (Outdoors) - Three Core

Home
Heat Shrinkable Termination Kits (Outdoors) – Three Core

Heat Shrinkable Termination Kits (Outdoors) Three Core

Code: N/A

The kits manufactured at Axis offer reliability and flexibility to meet the demands of cable network operators, suitable for LV & MV Cables. The components are designed to handle extreme weather, outdoor sunlight, and heavily polluted areas, addressing typical partial and surface corona discharge under challenging service conditions. All components are supplied in an expanded state and shrink effectively upon heat application.

Three Core

Features

Three Core

Nominal voltage U0/U(Um)	Cross section (mm2)	Dimensions(mm)		No. of rain sheds
Nominal voltage U0/U(Um)	Cross section (mm2)	L	D	No. of rain sheds
3.6 / 6(7.2)kV	50-120	900	105	6
	150-240
	300-400
	500
6 / 10(12)kV	50 -95	900	105	6
6.35 / 11(12)kV	120-185	900	105	6
	240-300
	400-500
	630
8.7 / 15(17.5)kV	25-50	900	105	6
	70-120
	150-240
	300-400
	500-630
12 / 20(24)kV	35-50	900	105	12
12.7 / 22(24)kV	70-120	900	105	12
12.7 / 22(24)kV	150-240	900	105	12
12.7 / 22(24)kV	300-400	900	140	12
12.7 / 22(24)kV	500-630	900	140	12
18 / 30(36)kV	35-50	1100	105	18
19 / 33(36)kV	70-120	1100	105	18
19 / 33(36)kV	150-240	1100	140	18
	300-400
	500-630
20.8 / 36(42)kV	50	1100	140	18
26 / 35(42)kV	70-120	1100	140	18
	150-240
	300-400
	500-630

Features

Design of Axis Termination Kits

Woer provides a universal system for indoor and outdoor terminations applicable to paper or polymeric insulated cables.

1. Electrical Stress Control

Yellow stress relief mastic is laid around the end of the screen cut. Stress control tube, together with stress relief mastic, is used to smooth out the electrical field at the cable end.

2. Excellent Anti-tracking Properties

Anti-tracking insulation tubes and rain sheds demonstrate excellent tracking and erosion resistance. This protect Woer terminations from tracking even in severe service conditions.

3. Additional Creepage

Anti-tracking rain sheds lengthen surface creepage distance.

4. Moisture Sealing

Durable sealing is achieved by hot-melted adhesive inside the sealing tube and anti-tracking insulation tube. For 3-core cables, the crutch area is sealed and protected with an adhesive-coated breakout which is installed over the cores and the end of oversheath.

5. Earth Connection

Either soldering or solderless earth connection is available to connect metal screen or armour to ground. For cables with wire screen, copper wires are imbedded in the sealing mastic to prevent any corrosion and moisture sealing.

We provide end-to-end service with kit installation service with all lugs and accessories comes with the entire termination kit. We provide both aluminium and copper lugs depending on requirements.

Heat Shrinkable Termination Kits (Outdoors) - Three Core