Two Poles Crossaram (Lattice TYPE)

Code: N/A
Download Datasheet

Description

APPLICATION : The “”Double Dead End Crossarm”” setup is employed in pole line construction to offer enhanced support and stability at termination points or directional changes. Featuring two horizontal beams mounted on a utility pole, each equipped with dead-end insulators, it provides added strength for securing conductors. This configuration is commonly used in areas with higher mechanical loads or at critical endpoints in electrical distribution or transmission lines.

1) Material : Mild Steel to IS 2062, Grade ‘A’ / BS EN 10025
Angle size as pe IS 808.
2) Finish : Hot Dip Galvanised to BS EN ISO 1461
3) Coating Thickness : Avg. 86 Microns min.

NOTE:
1) All dimensions are in millimeters (mm) unless otherwise specified.
2) Dimensions and holes can be customized according to customer requirements.
3) Material grades can be customized to meet the customer’s requirements and tender
specifications.

SR NO. ANGLE PROFILE PHASE SPACING (Ec) (mm) E – CODE
1 70x70x7 1700 AG2P701700
2 70x70x7 2500 AG2P702500
3 80x80x8 2000 AG2P802000
4 80x80x8 2500 AG2P802500
5 90x90X8 1500 AG2P901500