Tape to Tape – BB7

Code: N/A
Download Datasheet

Description

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

A mm2 Powder(g) Mould Type Clamp Type
20*3 #45 ABB7-C-203 AHCC
25*3 #65 ABB7-C-253 AHCC
25*4 #90 ABB7-C-254 AHCC
25*6 #115 ABB7-C-256 AHCC
30*2 #65 ABB7-C-302 AHCC
30*3 #65 ABB7-C-303 AHCC
30*4 #90 ABB7-C-304 AHCC
30*5 #115 ABB7-C-305 AHCC
31*3 #65 ABB7-C-313 AHCC
31*6 #150 ABB7-C-316 AHCC
38*3 #90 ABB7-C-383 AHCC
38*5 #150 ABB7-C-385 AHCC
38*6 #200 ABB7-C-386 AHCC
40*3 #90 ABB7-C-403 AHCC
40*4 #115 ABB7-C-404 AHCC
40*5 #150 ABB7-C-405 AHCC
40*6 #200 ABB7-C-406 AHCC
50*3 #150 ABB7-C-503 AHCC
50*4 #200 ABB7-C-504 AHCC
50*5 #200 ABB7-C-505 AHCC
50*6 #250 ABB7-C-506 AHCC

Application :

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

 

Installation :

The majority of connections have at least twice the cross sectional area of the conductors being joined and equivalent or greater current carrying capacity because the connection is a fusion of high conductivity high copper content alloy it will withstand repeated fault current and will not loosen in the way that mechanical connectors can corrosion resistance too, is exceptional, due to the alloy very high copper content.

The moulds are designed to complete 30-40 connections depending on the care given to the mould during usage, transport and storage.