Cable to Tape – CB1

Code: N/A
Download Datasheet

Description

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

30050*62*#150ACB1-D-300506AHCD

A mm2 B mm2 Powder(g) Mould Type Clamp Type
16 20*3 #45 ACB1-C-16203 AHCC
16 25*3 #45 ACB1-C-16253 AHCC
25 20*3 #45 ACB1-C-25203 AHCC
25 25*3 #45 ACB1-C-25253 AHCC
35 20*3 #45 ACB1-C-35203 AHCC
35 25*3 #45 ACB1-C-35253 AHCC
50 20*3 #45 ACB1-C-50203 AHCC
50 25*3 #65 ACB1-C-50253 AHCC
Ø8mm 20*3 #45 ACB1-C-8SC203 AHCC
Ø8mm 25*3 #65 ACB1-C-8SC253 AHCC
70 25*3 #65 ACB1-C-70253 AHCC
70 25*4 #65 ACB1-C-70254 AHCC
70 25*6 #65 ACB1-C-70256 AHCC
Ø10mm 25*3 #65 ACB1-C-10SC253 AHCC
Ø10mm 25*4 #65 ACB1-C-10SC254 AHCC
Ø10mm 25*6 #65 ACB1-C-10SC256 AHCC
95 25*4 #90 ACB1-C-95254 AHCC
95 25*6 #90 ACB1-C-95256 AHCC
120 25*6 #90 ACB1-C-120256 AHCC
120 30*5 #115 ACB1-C-120305 AHCC
150 25*6 #115 ACB1-C-150256 AHCC
150 30*5 #115 ACB1-C-150305 AHCC
150 40*5 #150 ACB1-C-150405 AHCC
185 31*6 #150 ACB1-C-185316 AHCC
185 40*5 #150 ACB1-C-185405 AHCC
185 50*5 #200 ACB1-C-185505 AHCC
240 50*5 #200 ACB1-C-240505 AHCC
240 50*6 2*#150 ACB1-D-240506 AHCD
300 50*6 2*#150 ACB1-D-300506 AHCD

Application :

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

 

Installation :

The majority of connections have at least twice the cross sectional area of the conductors being joined and equivalent or greater current carrying capacity because the connection is a fusion of high conductivity high copper content alloy it will withstand repeated fault current and will not loosen in the way that mechanical connectors can corrosion resistance too, is exceptional, due to the alloy very high copper content.

The moulds are designed to complete 30-40 connections depending on the care given to the mould during usage, transport and storage.