Cable to Cable – CC4

Code: N/A
Download Datasheet

Description

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows
superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

A mm2 B mm2 Powder(g) Mould Type Clamp Type
16 16 #65 ACC4-C-1616 AHCC
25 25 #45 ACC4-C-2525 AHCC
35 35 #65 ACC4-C-3535 AHCC
35 25 #65 ACC4-C-3525 AHCC
50 50 #90 ACC4-C-5050 AHCC
50 35 #90 ACC4-C-5035 AHCC
50 25 #90 ACC4-C-5025 AHCC
70 70 #115 ACC4-C-7070 AHCC
70 50 #115 ACC4-C-7050 AHCC
70 35 #115 ACC4-C-7035 AHCC
70 25 #115 ACC4-C-7025 AHCC
95 95 #150 ACC4-C-9595 AHCC
95 70 #150 ACC4-C-9570 AHCC
95 50 #115 ACC4-C-9550 AHCC
95 35 #115 ACC4-C-9535 AHCC
120 120 #200 ACC4-C-120120 AHCC
120 95 #200 ACC4-C-12095 AHCC
120 70 #150 ACC4-C-12070 AHCC
120 50 #150 ACC4-C-12050 AHCC
150 150 #250 ACC4-C-150150 AHCC
150 120 #250 ACC4-C-150120 AHCC
150 95 #200 ACC4-C-15095 AHCC
150 70 #150 ACC4-C-15070 AHCC
185 185 2*#150 ACC4-D-185185 AHCD
185 150 #250 ACC4-C-185150 AHCC
185 120 #250 ACC4-C-185120 AHCC
185 95 #200 ACC4-C-18595 AHCC
185 70 #200 ACC4-C-18570 AHCC
240 240 2*#250 ACC4-D-240240 AHCD
240 185 2*#200 ACC4-D-240185 AHCD
240 150 2*#200 ACC4-D-240150 AHCD
240 120 2*#150 ACC4-D-240120 AHCD

Application :

AxiWeld Exothermic welding is a simple, cost effective, self contained and portable process of forming high quality and permanent metal-to-metal connections.

The AxiWeld line of products are manufactured and tested in accordance to IEEE 837.

Through this process, connections are made by a reaction of a powdered copper compound and aluminium which allows superheated molten copper alloy to form on and around the conductors to be joined. The final connections are electrically conductive due to their high copper content and have strong corrosion resistant properties.

The exothermic welding process can be used to weld materials for electrical purposes including but not limited to:
Stainless Steel, Brass, Copper, Bronze, Galvanized Steel, Steel Rail, Cast Iron and Copper Clad Steel.

 

Installation :

The majority of connections have at least twice the cross sectional area of the conductors being joined and equivalent or greater current carrying capacity because the connection is a fusion of high conductivity high copper content alloy it will withstand repeated fault current and will not loosen in the way that mechanical connectors can corrosion resistance too, is exceptional, due to the alloy very high copper content.

The moulds are designed to complete 30-40 connections depending on the care given to the mould during usage, transport and storage.